Introduction

Innokin is a brand created in 2011, a Chinese company that offers high quality products at affordable prices.

With numerous certifications and patents, they work daily to develop equipment that’s easy to use, unique and unmatched.

Innovation, design and high-quality standards are the brand’s driving forces.

Let’s talk about this kit

Innokin's Sceptre kit is a very design pod mod, easy to use and above all terribly efficient !

Its dimensions (106.8 x 29 x 18mm) are very ergonomic.
Its rubber coating makes it particularly pleasant to the touch. The upper part is metallic, some of the colours have a beautiful honeycomb coating. On the side of the mod is the Fire button. It can be activated and deactivated with 3 clicks.

It’s equipped with all the safety features one would expect from such a device : against overheating, short circuit and excessive discharge, as well as protection during charging.

Its cartridges offer a capacity of 3ml. They are easily filled from the side by removing the rubber tab. The coils can be changed in a jiffy. Simply remove the cartridge from the mod, rotate the lower part according to the instructions, unscrew the coil, place a new one and put it back together !

Two types of coils are available :

  • A 0.5ohm for a restrictive aerial draw (RDL)
  • A 1.2ohm for tight draw (MTL) and/or high nicotine levels

The mod automatically detects the value of the installed coil and adapts the power accordingly.
Two settings are available with each coil. To change it, hold down the Fire button for 3 seconds when the mod is off. You’ll then see a light. The green one indicates that you’re on the lowest power (18W with the 0.5ohm and 9W with the 1.2ohm) and the purple one, the highest power (20W with the 0.5 and 10W with the 1.2ohm).

In addition to these settings, the cartridges are equipped with an adjustable airflow with MTL and RDL markings on the sides to indicate what type of draw you’re in. It allows you to adjust the airflow to your preferences.

The mod is equipped with a 1400mAh battery, which gives it great autonomy !
And a led indicates the remaining battery level (green = 100-50%, blue = 50-10% and red = 10-0%).

And so ?

We’ve asked Arnaud, Sweetch’s CEO, to test this kit. He paired it with Freeze Tea’s Tagada Strawberry, Tamarillo and Frosted Mint e-liquid, a delicious iced tea with our childhood sweets, tamarillo for the tangy touch and frosted mint !

He shared his impressions with us :

What was your first impression when you saw this kit ?
I found it beautiful. I really like the little silver bar on the mod and the different feel for each side.

How was it getting started ?
It might almost seem a little "cheap" at first glance, but you really feel it's quality as soon as you pick it up. It's not heavy, but it’s not super light eighter.

The instructions have pictures. They helped me change the power settings.

A 1.2ohm coil is pre-installed and this is the one I used. The filling hole is easily accessible, and you can see the liquid level. The pod simply slides into the mod and holds perfectly in place thanks to the magnets.

All in all, it was very easy and quick !

How was your experience with this kit ?
I was very pleasantly surprised by the amount of steam. It’s dense and consistent without going into cloud chasing.
I'm not usually a fan of plastic tanks, but here the flavour rendering is really interesting.

I'm a former smoker, I used to smoke a pack a day, and this device holds me largely one day without charging it, so a nice autonomy, despite its rather compact size.

The coils can withstand a lot of puffs (at least with a liquid in PG/VG 50/50). The cotton doesn’t burn ! Changing the coil is very simple and hygienic. The 0.5ohm coil offers an excellent RDL. Don’t expect big clouds, but there’s really a nice steam production.

No leaks and no liquid overflow, even though I’m not very delicate with it ^^ No liquid drops on the connectors ! And this is something that’s normally quite common with this type of devices.

When I activate it by pressing the button, the reaction is almost immediate. There’s always a small delay when I activate it automatically. It can almost give the illusion that the power is higher when activated with the button.


Have you encountered any difficulties ?
Absolutely none.

Who would you recommend this kit to ?
A beginner, but also an experienced vaper, because there’s a good steam production and a great rendering of flavours.

Features

  • Dimensions : 106.8 x 29 x 18mm
  • Weight : 92g
  • Built-in 1400mAh battery
  • Power : 9 or 10 / 18 or 20 depending on the installed coil
  • Draw : direct and indirect
  • Capacity : 3ml
  • Filling : from the side
  • Coils : 0.5 or 1.2ohm Sceptre
  • Airflow : adjustable
  • Charging : micro-USB

Content

  • 1x Pod Sceptre with pre-installed 1.2ohm coil
  • 1x 0.5ohm coil
  • 1x Micro USB cable
  • 1x Security card
  • 1x User’s guide

Positives

  • The autonomy
  • The magnetic pod system
  • The super elegant design

Negatives

  • The all-plastic tank
  • To be used, like most of these devices, only with 50/50 liquids

Conclusion

We’ve tested Innokin’s Scepter kit for you. An ergonomic kit, easy to use and with an excellent quality.
Its versatility is very appreciable : it offers both an MTL and an RDL draw.
Its steam production is excellent, both in terms of quantity and quality.It offers a great autonomy with its 1400mAh and its 3ml capacity !
Basically, this device is ideal for a beginner as well as for an experienced vaper.

Thank you for reading.

The Sweetch Team