Offering greater autonomy and more customisation options, the OXVA NeXLIM 2 pod kit takes the NeXLIM concept to the next level without making it unnecessarily complicated. This e-cigarette combines a 2000 mAh battery with adjustable power up to 40 W, a colour display and three-position airflow control. Thanks to the range of compatible cartridges, the same pod can be used for both a tight MTL draw and a more open RDL vape.

NeXLIM 2: 2000 mAh in a slim and robust pod

OXVA houses its 2000 mAh battery in a device measuring 127.5 x 28.5 x 17.5 mm. Weighing 88.5 g and featuring a zinc alloy chassis, the NeXLIM 2 retains a sleek profile whilst offering a secure grip.

Battery life naturally varies depending on the power setting, the coil used, the selected mode and your vaping pace. When the battery needs recharging, the USB-C 5V/3A port allows for fast charging. Unlike some minimalist pods, the USB-C cable is included in the box here.

Power output from 5 to 40 W, kept under control

The NeXLIM 2 allows you to adjust the power output between 5 and 40 W. However, OXVA automatically limits the available power based on the detected coil resistance – a handy safety feature to reduce the risk of applying an unsuitable power level to the pod.

Two operating modes are available. Boost mode prioritises a more sustained vape and greater vapour production, whilst Eco mode focuses more on preserving battery life and minimising e-liquid consumption. Pressing the button twice switches between modes, and pressing it three times accesses the wattage settings.

A 0.85-inch HD colour screen

The NeXLIM 2’s interface features a 0.85-inch HD colour screen which displays the key information required during use, including power output and the active mode.

OXVA adds a touch of personalisation with several graphic themes. Two are available straight away and six more can be unlocked gradually by taking a certain number of puffs.

MTL or RDL: three positions to adjust the airflow

Rather than an airflow control requiring very fine adjustments, OXVA has opted for a three-level airflow system. Close it for a more MTL-oriented draw, choose the middle position for a smoother inhalation, or open it fully for a more airy RDL vape.

This system allows you to quickly adapt the vaping experience when switching from one NeXLIM pod to another.

Two NeXLIM UNITECH 3.0 pods included

The kit comes with two new 4 ml NeXLIM UNITECH 3.0 cartridges, in 0.6 and 0.8 ohm. Their Dual Mesh technology is designed to ensure consistent vapour production, whilst their design incorporates an enlarged condensation collection chamber to improve leak management.

OXVA claims up to 20 to 30 refills, or 120 ml of e-liquid in Eco mode. This is a maximum estimate: actual lifespan depends, in particular, on the e-liquid, the power setting and usage habits.

The NeXLIM 2 remains compatible with all cartridges in the NeXLIM range. You can therefore choose the coil based on your preferred draw:

• 0.6 ohms – included: RDL vaping, 20 to 40 W, e-liquids from 50/50 to 30/70 PG/VG, recommended nicotine strength up to 6 mg/ml
• 0.8 ohms – included: open MTL, 12 to 32 W, e-liquids 50/50 PG/VG, recommended nicotine up to 20 mg/ml
• 1.2 ohms – sold separately: Tighter MTL, 10 to 25 W, e-liquids ranging from 50/50 to 70/30 PG/VG, recommended nicotine strength up to 20 mg/ml

How do you refill a NeXLIM 2 pod?

You can refill the cartridge without removing it from the pod. Open the tank flap, pour in up to 4 ml of e-liquid, then carefully close the opening. With a new cartridge, wait approximately 10 minutes before using it for the first time to allow the coil to soak up the e-liquid properly.

A persistent decline in flavour or vapour production, or the appearance of an unusual or burnt taste, indicates that it is time to replace the entire cartridge.

Why buy the OXVA NeXLIM 2 kit in Switzerland?

The NeXLIM 2 strikes an interesting balance between fully automatic pods and e-cigarettes requiring more adjustment. Vapers who wish to customise their vaping experience have access to adjustable power, a three-position airflow and Boost/Eco modes, whilst still benefiting from an interface that remains user-friendly.

Available on Sweetch.ch, the OXVA kit also stands out thanks to its 2000 mAh battery, 3A USB-C charging and compatibility with several NeXLIM cartridges. A versatile setup for switching between MTL and RDL with a single device.

NeXLIM 2 kit specifications

• Brand: OXVA
• Model: NeXLIM 2
• Dimensions: 127.5 x 28.5 x 17.5 mm
• Weight: 88.5 g
• Material: zinc alloy
• Built-in battery: 2000 mAh
• Power: 5 to 40 W
• Modes: Boost and Eco
• HD colour screen: 0.85"
• Airflow: 3 levels
• Vaping styles: MTL to RDL
• Pod capacity: 4 ml
• Technology: Dual Mesh UNITECH 3.0
• Charging: USB-C 5V/3A
• Compatible with NeXLIM pods

Contents of the OXVA NeXLIM 2 kit

• 1 NeXLIM 2 pod
• 1 pre-installed 4 ml NeXLIM UNITECH 3.0 0.6 ohm pod
• 1 NeXLIM UNITECH 3.0 0.8 ohm 4 ml cartridge
• 1 USB-C cable
• 1 user manual