Geekvape Z Subohm 5: the next-generation Zeus clearomiser

The Geekvape Z Subohm 5 continues the evolution of the renowned Zeus range with a design aimed at vapers who prefer direct inhalation and substantial vapour production. This sub-ohm clearomiser combines an adjustable top airflow, a quick ‘Push to Fill’ refill system and extensive compatibility with Z Series coils.

Featuring a 5.5 ml tank, expandable to 7 ml using the supplied Pyrex extension, it allows you to enjoy long vaping sessions whilst remaining easy to use. Its top-mounted airflow system also helps to minimise the risk of leaks.

A robust steel design with an 810 drip tip

The Z Subohm 5 clearomiser features a steel frame combined with a Pyrex tank. Its 24 mm base diameter makes it easy to fit onto many electronic mod boxes, whilst its width reaches 29 mm at the tank.

With a height of 59.6 mm, including the 810 drip tip, its dimensions are well-suited to high-power set-ups. Its 810 drip tip facilitates direct-to-lung vaping with generous airflow.

Push-to-Fill system: quick access to the tank

Geekvape has fitted the Z Subohm 5 with a Push-to-Fill system that allows access to the fill port without having to completely unscrew the top of the clearomiser.

A simple press on the designated area allows the top cap to slide open. You can then simply add your e-liquid and carefully close the mechanism again.

Two capacities are available thanks to the tanks supplied:

• 5.5 ml with the pre-installed Pyrex tank
• 7 ml with the included replacement Pyrex tank

Adjustable top airflow: customise your draw

The Z Subohm 5 features an airflow ring situated above the tank. This design helps to reduce the risk of leaks, whilst allowing you to precisely adjust the amount of air drawn in.

By opening the airflow fully, you get an airy draw suitable for DTL vaping. A narrower opening allows for a tighter draw, within the limits of a clearomiser designed primarily for direct-to-lung inhalation.

Compatibility with Geekvape Z Series and Z Series XM coils

The Geekvape Z Subohm 5 clearomiser is compatible with standard Z Series coils as well as the Z Series XM versions. This compatibility allows you to choose different resistance values depending on your preferences and the power of your e-cigarette.

Two XM coils are included in the kit.

Z Series XM 0.2 ohm coil: for a powerful DTL vape

The 0.2 ohm XM coil is designed for vapers looking for high vapour production and a particularly airy direct-to-lung (DTL) draw.

• Recommended power range: 70 to 80 W
• Inhalation type: DTL
• Recommended PG/VG ratio: from 30/70 to 20/80
• Recommended nicotine strength: up to 3 mg/ml

Z Series XM 0.4 ohm coil: a balance between power and flavour

The 0.4 ohm XM version allows you to enjoy direct-to-lung vaping at a more moderate power setting, whilst maintaining generous vapour production and good flavour reproduction.

• Recommended power range: 50 to 60 W
• Inhalation type: DTL
• Recommended PG/VG ratio: 30/70 to 20/80
• Recommended nicotine strength: up to 6 mg/ml

Z Series XM coils are designed to offer a long service life and maintain consistent flavour delivery. Their lifespan depends, in particular, on the type of e-liquid, the selected wattage and how often you vape.

How do I use and maintain the Z Subohm 5 clearomiser?

Filling the tank

1. Press the designated area to slide the top cap off.
2. Pour your e-liquid into the filling port.
3. Close the top cap securely.
4. If the coil is new, wait about 10 minutes before using it for the first time.

Replacing a Z Series coil

1. Unscrew the base of the clearomiser.
2. Remove the used coil by pulling it out, using the supplied key if necessary.
3. Insert the new coil, ensuring it is seated correctly.
4. Screw the base back on and fill the tank.
5. Allow the new coil to soak up the e-liquid for about 10 minutes before vaping.

A decline in flavour quality, reduced vapour production or the onset of a burnt taste may indicate that it is time to change the coil.

Technical specifications of the Geekvape Z Subohm 5

• Brand: Geekvape
• Model: Z Subohm 5
• Type: sub-ohm clearomiser
• Capacity: 5.5 ml or 7 ml depending on the Pyrex tank
• Filling: top-fill ‘Push to Fill’
• Airflow: top-mounted and adjustable
• Inhalation: mainly DTL
• Compatible coils: Geekvape Z Series and Z Series XM
• Coils included: XM 0.2 ohm and XM 0.4 ohm
• Base diameter: 24 mm
• Maximum tank diameter: 29 mm
• Height: 59.6 mm including drip tip
• Drip tip: 810 standard
• Materials: steel and Pyrex

Contents of the Geekvape Z Subohm 5 kit

• 1 Z Subohm 5 clearomiser
• 1 Z Series XM 0.2 ohm coil
• 1 Z Series XM 0.4 ohm coil
• 1 pre-installed 5.5 ml Pyrex glass tube
• 1 replacement 7 ml Pyrex glass tube
• 1 coil removal tool
• 1 user manual

Why choose the Geekvape Z Subohm 5?

The Z Subohm 5 combines the benefits of a modern sub-ohm clearomiser with compatibility with a well-established range of coils. Its slide-top filling system, top airflow and tank capacity of up to 7 ml make it a practical choice for DTL vaping enthusiasts.

Find the Geekvape Z Subohm 5 clearomiser at Sweetch.ch, your specialist vaping shop in Switzerland, and enjoy a device designed for powerful e-cigarettes and e-liquids rich in vegetable glycerine.