OXVA VPrime 2 Kit: a powerful and versatile dual-mesh pod

The OXVA VPrime 2 combines the performance of a sub-ohm e-cigarette with the simplicity of a pod system. Capable of reaching 60 W, it is primarily aimed at RDL and DTL vapers who want to produce generous clouds without having to switch to particularly bulky kit.

This second-generation model features a built-in 3400 mAh battery, a 0.98" colour TFT screen, adjustable airflow and two operating modes. Its main innovation, however, lies in its new VPrime Dual Mesh cartridges, designed to alter the vaping experience depending on whether Eco or Boost mode is selected.

Eco or Boost: use the Dual Mesh however you like

The VPrime Dual Mesh cartridges incorporate two independent mesh elements. In Eco mode, only one mesh is activated to moderate the power output as well as battery and e-liquid consumption. Boost mode activates both meshes simultaneously to increase the heating surface area and deliver a more powerful and voluminous vapour.

Four quick presses of the button allow you to switch between modes. The VPrime 2 then adjusts its power range to suit the installed cartridge. You can then adjust the wattage within the specified range and regulate the airflow to further customise your vaping experience.

RDL or DTL vaping with adjustable airflow

The OXVA VPrime 2 kit is designed to transition from RDL inhalation to a more open-air DTL draw. Its adjustable airflow allows you to easily modify the amount of air drawn in during inhalation.

Combined with your choice of pod, Eco or Boost mode and power settings, this system offers a range of options without being complicated to use.

3400 mAh and fast USB-C 5V/3A charging

To power its performance, which can reach up to 60 W, OXVA has equipped the VPrime 2 with a built-in 3400 mAh battery. Battery life naturally varies depending on the selected power setting, the pod, the mode and the frequency of use.

When recharging is required, the 5V/3A-compatible USB-C port allows you to quickly top up the battery. A USB-C cable is supplied with the kit.

Automatic activation or Fire button

The VPrime 2 offers two ways to trigger the vape. You can use its Fire button in the traditional way or take advantage of automatic activation on inhalation. In the latter case, simply inhale to start the heating process.

This dual activation system allows you to choose the most comfortable method at any time, depending on your habits.

A 0.98-inch colour TFT screen

The 0.98-inch colour TFT screen displays all the key information you need whilst using the device. In particular, it allows you to check the power output, the active mode, the battery level and cartridge-related data.

The VPrime 2 thus retains a clear interface despite its various customisation options.

Two 6 ml VPrime Dual Mesh cartridges included

OXVA supplies two 6 ml cartridges directly with its VPrime 2. They feature built-in coils and utilise Unitech 3.0 technology.

VPrime Dual Mesh 0.6 ohm

The 0.6 ohm cartridge is the more versatile of the two options. In Eco mode, it operates at 0.6 ohm between 20 and 35 W for an RDL vape. The specifications recommend e-liquids with a PG/VG ratio of between 50/50 and 40/60 and a nicotine strength of up to approximately 9 mg/ml.

In Boost mode, using both meshes simultaneously results in a resistance of 0.3 ohms. The power range then shifts from 35 to 50 W, moving from a very open RDL to DTL, with a recommended nicotine strength of up to approximately 6 mg/ml.

VPrime Dual Mesh 0.4 ohm

More suited to an airy vape, the 0.4 ohm pod operates between 28 and 40 W in Eco mode. It is suitable for very open RDL and DTL, with stated PG/VG ratios ranging from 40/60 to 30/70 and up to approximately 6 mg/ml of nicotine.

In Boost mode, the two mesh coils are equivalent to 0.2 ohms and allow for a power output of between 40 and 60 W. This configuration is designed for airy DTL vaping, with a recommended nicotine strength of up to approximately 3 mg/ml.

How do you fill the VPrime Dual Mesh cartridges?

Each cartridge has a capacity of 6 ml and features side-fill refilling. Open the flap provided for this purpose, pour in your e-liquid, then carefully reseal the tank.

When using a new cartridge for the first time, wait approximately 10 minutes after filling before vaping. This allows the cotton to soak up the e-liquid properly.

As the coil is built-in, the entire cartridge must be replaced when performance drops or a burnt taste develops.

Compatible with older VPrime cartridges

The VPrime 2 remains compatible with standard VPrime cartridges. Users of the previous model can therefore continue to use their compatible cartridges.

However, the specific Eco/Boost mode associated with the Dual Mesh is only available on the new VPrime Dual Mesh cartridges.

Why choose the OXVA VPrime 2?

The VPrime 2 is an attractive option for vapers looking for a powerful pod designed for RDL and DTL vaping. Its maximum output of 60 W and adjustable airflow offer plenty of scope for customisation, whilst its 3400 mAh battery meets the power requirements of sub-ohm vaping.

The Dual Mesh system adds a particularly practical feature: switching from Eco mode to Boost mode allows you to alter the performance of the same pod without having to replace it. The auto-draw function, colour display and 6 ml tank round off a package designed to combine performance with ease of use.

The OXVA VPrime 2 pod kit is available in Switzerland from Sweetch.ch.

Specifications of the OXVA VPrime 2 kit

• Brand: OXVA
• Model: VPrime 2
• Maximum power: 60 W
• Battery: built-in, 3400 mAh
• Charging: USB-C 5V/3A
• Modes: Eco and Boost
• Activation: automatic on inhalation or Fire button
• Display: 0.98" colour TFT
• Airflow: adjustable
• Inhalation type: RDL to DTL
• Pods: VPrime Dual Mesh
• Technology: Unitech 3.0
• Pod capacity: 6 ml
• Filling: side-fill
• Cartridges included: 0.4 and 0.6 ohms
• Compatibility: VPrime Dual Mesh and standard VPrime cartridges
• Dimensions: 113 x 41 x 28 mm

Kit contents

• 1 OXVA VPrime 2 pod
• 1 x 6 ml VPrime Dual Mesh 0.4 ohm pod
• 1 x 6 ml VPrime Dual Mesh 0.6 ohm pod
• 1 x USB-C cable
• 1 x user manual